- Localidad: Arlandastad
- Pais: SUECIA
- Listado: marzo 5, 2019 12:31 am
- Vence el: 250 dias, 16 horas
Baby hanger mould
Mold Size 450x450mm / advice choose 200Ton injection machine
Mold cavity 2 cavities
Mold Steel 718H steel, the original hardness is HRC32 degree
Mold steel treatment way At final arranged hardness treatment for the core and cavity plates to HRC48-52 degree thur. nitrogen treatment
Mold gate way Cold runner
Mold uselife 600000 shots
Mold cycle time 35 sec
1st. Test mold time 45 days after confirmed mold drawing files
Mold doff way ejectors
Package PET film covered then packing into standard wooden case
-If this baby hanger mould can designed much more cavities?
Yes, can be. That depend on client’s machine type. if bigger machine then will design more cavities.
-If this baby hanger mould easy get flash or not?
Not easy, as we make all ejectors holes by slow wire line cutting always.
-If this baby hanger mould can work full automatic or not?
Yes, sure. Must 100% work full automatic.
If need more information about this mould, pls contact with us. tks!
Mold steelP20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more
Mold cavity1 or more (depend on client)
Surface treatmentselectroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)
Plastic materialsPP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other
SoftwareUG, PRO-E, MOLDFLOW, CAD, CAE, VISI
Mold gate waycold runner/hot runner/semi-hot runner
Mold baseHASCO, DME, LKM, HOME-MADE
Mold doff systemejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more
Mold coolingWater cooling/air cooling/beryllium bronze cooling
Mold payment50% down payment by T/T, 50% balance by T/T before shipment
Mold shipmentBy sea/air/train
Mold packagingpacked into standard wooden cases
Mold quotationmost reasonable as rich experience
1) Mould structure design
Professional designers provide you with reasonably designed mould to shorten cycle hours.
Reducing unnecessary procedure improves efficiency.
2) Mould cooling system
According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.
3) Accessory for mould
Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.
4) Deal with mould
Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850
1) We can repair the mould in one year for some free and provide technology. .
2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.
3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer’s negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.China pp coat hanger mold
74 total vistas, 1 hoy